Parameter Reference

CHAKRABOOST exposes 4 global parameters, 22 per band (across 8 bands), and 3 global surround controls. Every parameter is fully automatable from your DAW.

Global Parameters

Parameter	ID	Range	Default	Description
Input Gain	`inputGain`	−24 to +24 dB	0 dB	Level adjustment before the crossover filter bank
Output Gain	`outputGain`	−24 to +24 dB	0 dB	Level adjustment after all band processing and recombination
Dry/Wet	`dryWet`	0–100%	100%	Blend between unprocessed input and fully processed output
Bypass	`bypass`	On/Off	Off	Pass audio through unprocessed (all bands bypassed)

Per-Band Parameters

Each of the 8 bands exposes 22 parameters, organized into five groups. Parameter IDs are prefixed with bandN_ where N is the band index (0–7).

Phaser

Parameter	ID Suffix	Range	Default	Description
Depth	`depth`	0.0–1.0	0.5	Phaser modulation depth — how far the all-pass frequency sweeps
Feedback	`feedback`	0.0–0.95	0.3	Phaser feedback amount — higher values create more resonant peaks
Mix	`mix`	0–100%	50%	Blend between dry band signal and phased signal
Rate	`rate`	0.01–20.0 Hz	1.0 Hz	LFO speed for phaser modulation

LFO

Parameter	ID Suffix	Range	Default	Description
LFO Mode	`lfoMode`	Sine / Triangle / Saw / Reverse Saw / Square / Random / Neural	Sine	Modulation waveform shape
Neural Rhythm	`neuralRhythm`	0.0–1.0	0.5	Rhythmic character of Neural mode
Neural Articulation	`neuralArticulation`	0.0–1.0	0.5	Attack shape of Neural mode
Neural Depth	`neuralDepth`	0.0–1.0	0.5	Modulation intensity of Neural mode
Neural Temperature	`neuralTemperature`	0.0–1.0	0.5	Randomness/variation in Neural mode

Spatial

Parameter	ID Suffix	Range	Default	Description
Pan	`pan`	−1.0 to +1.0	0.0	Static horizontal pan position (L/R)
Pan Depth	`panDepth`	0.0–1.0	0.0	LFO-driven horizontal pan modulation depth
Pan Y	`panY`	−1.0 to +1.0	0.0	Static front/back position (surround modes only)
Pan Depth Y	`panDepthY`	0.0–1.0	0.0	LFO-driven front/back pan modulation depth (surround modes only)
Orbit Angle	`orbitAngle`	0–360°	0°	Phase offset for spatial LFO orbit

Compression

Parameter	ID Suffix	Range	Default	Description
Threshold	`compThreshold`	−60 to 0 dB	−20 dB	Level above which compression engages
Ratio	`compRatio`	1:1–20:1	4:1	Compression ratio above threshold
Attack	`compAttack`	0.1–100 ms	10 ms	Base attack time (modulated by crest-factor analysis)
Release	`compRelease`	10–1000 ms	100 ms	Base release time (modulated by crest-factor analysis)
Comp Mix	`compMix`	0–100%	100%	Parallel compression blend — 0% is dry only, 100% is fully compressed

Utility

Parameter	ID Suffix	Range	Default	Description
Gain	`gain`	−24 to +24 dB	0 dB	Post-crossover band level
Solo	`solo`	On/Off	Off	Isolate this band
Mute	`mute`	On/Off	Off	Silence this band

Global Surround Parameters

Parameter	ID	Options/Range	Default	Description
Speaker Layout	`speakerLayout`	Stereo / Quad / 5.1 / 7.1	Stereo	Output channel configuration
LFE Channel	`lfeChannel`	None / Ch 1–8	None	Route a specific band to the LFE (subwoofer) channel
LFE Level	`lfeLevel`	0.0–1.0	0.7	Level of the LFE channel send

The Neural LFO parameters (neuralRhythm, neuralArticulation, neuralDepth, neuralTemperature) only affect modulation when lfoMode is set to Neural. In all other LFO modes, these parameters are ignored.

Getting Started

Interface Guide

Features

Reference

Parameter Reference

Parameter Reference

Global Parameters

Per-Band Parameters

Phaser

LFO

Spatial

Compression

Utility

Global Surround Parameters

​Parameter Reference

​Global Parameters

​Per-Band Parameters

​Phaser

​LFO

​Spatial

​Compression

​Utility

​Global Surround Parameters

Parameter Reference

Global Parameters

Per-Band Parameters

Phaser

LFO

Spatial

Compression

Utility

Global Surround Parameters